Specifications
For use with CMT Rabbeting Bit 2″ diameter cutter, 7/8″ cut depth. These bushings will allow you to cut rabbets from 1/16″ to 11/16 deep. Use CMT rabbet bit 835.990.11for best results.
791.705.00
| Diameter () | Cutting Depth (H) |
| 47,6mm (1-7/8″) | 1,6mm (1/16″) |
| 44,5mm (1-3/4) | 3,2mm (1/8″) |
| 38,1mm (1-1/2) | 6,35mm (1/4″) |
| 31,7mm (1-1/4) | 19,5mm (3/8″) |
| 25,4mm (1″) | 12,7mm (1/2″) |
791.706.00
| Diameter () | Cutting Depth (H) |
| 41,2mm (1-5/8″) | 4,7mm (3/16″) |
| 34,6mm (1-3/8″) | 8mm (5/16″) |
| 28,6mm (1-1/8″) | 11,1mm (7/16″) |
| 22,2mm (7/8″) | 14,3mm (9/16″) |
| 15,8mm (5/8″) | 17,5mm (11/16″) |
791.707.00
| Diameter () | Cutting Depth (H) |
| 38,9mm (1-17/32″) | 6mm (15/64″) |
| 32,5mm (1-9/32″) | 9,1mm (23/64″) |
| 27mm (1-1/16″) | 11,9mm (15/32″) |
| 20,6mm (13/16″) | 15mm (19/32″) |
| 14,3mm (9/16″) | 18,2mm (23/32″) |
WARNING:Cancer and Reproductive Harm –www.P65Warnings.ca.gov
